History

Structure of mill is probably C17, rewindowed in C18 with later alterations. Machinery probably early C19 with possibly some earlier features; secondary machinery late C19 and post 1900. Rear wing dated 1923. Documentary evidence for a mill 1528. Existing leat system pre-dates the canal c 1800 and mill sold to Brecknock and Abergavenny Canal Company in 1802. Early C19 miller Alex Gibson provided the village with electricity from a turbine driven generator.

Exterior

An intact water-powered cornmill with complete machinery and attached miller's house to NW and secondary generator house to SE. Single long range set across sloping site with leat approaching from Caerfanell Brook on higher ground to S. Original walls of colourwashed rubble, partly coursed, with corrugated iron roof; taller snecked rubble walls to later house wing with Welsh slate roof; brick and slate roofed cross range dated 1923 on W side. Original 2 storey main range has gabled upstand over machinery; first floor has a small window to left, boarded loading doors to centre, casement window right; ground floor openings under cambered arched voussoirs; stone sills. Attached later house wing to right has end stack with cornice, single 2-light casement window to first floor and two to ground floor; original entrance to side. Generator house forward from front left end is a brick, boarded and corrugated iron lean-to. Roughly finished left gable with upper small-paned window over door to timber platform (roof collapsed). Rear has a cambered arched first floor opening to original unit with wide arch for the culvert under the building; 2 storey gabled cross wing separates this from the house wing left with similar windows and catslide roof.

Interior

Interior retains probable C17 A-frame roof trusses with large flat through-purlins. Centre truss cut out for roof upstand over c 1900 machinery including a longtitudinal spindle held in a softwood cradle. Wide original boarded top floor supports a series of hoppers, bins and spouts for grain delivery; hinge hatches for belt-driven sack hoists. Main first-floor with centrally-placed twin pairs of grinding stones flanking the vertical timber drive-shaft with gearing for belt-driven pulleys etc for secondary operations. Inset open timber stairs and massive cross beams to wide boarded floor. Ground floor has boxed- in timber drive shaft and cast-iron gearing for stones, hoists etc; shutes, hopper and secondary machinery. Wheel house within S end of building; overshot wheel with cast-iron spokes to bolted rims and collars to timber axle. The wheel is fed from a timber trough at upper level on W side; the tail race is culverted and stone lined to E side.

Reasons for Listing

Listed Grade II* on account of the remarkably complete internal machinery; the best preserved example of a workable water mill with an internal waterwheel in Brecknock.

Group value with neighbouring listed items in the village.

External Links

• Cadwr Listing
• Wikidata Q17742663

External links are from the relevant listing authority and, where applicable, Wikidata. Wikidata IDs may be related buildings as well as this specific building. If you want to add or update a link, you will need to do so by editing the Wikidata entry.

Recommended Books

• 
  Old House Care and Repair
• 
  Pioneers of Modern Design: From William Morris to Walter Gropius (Penguin Art & Architecture)
• 
  Listed Buildings: The Law and Practice of Historic Buildings, Ancient Monuments and Conservation Areas
• 
  Old House Handbook 2 Books Bundle Collection (Old House Handbook: A Practical Guide to Care and Repair,Old House Eco Handbook: A Practical Guide to Retrofitting for Energy-Efficiency & Sustainability)
• 
  Yorkshire: York and the East Riding (Pevsner Architectural Guides: Buildings of England)
• 
  Harrow on the Hill: A photographic portrayal of listed buildings and structures (Historic Buildings Picture Guides)