Summary

Former slip, dating from the late C18, with slip cover of 1814-21, after a design by Sir Robert Seppings. The slip was subsequently floored, and used as a ‘scrieve board’ for ship design.

Description

MATERIALS: timber frame with modern cladding: corrugated steel sides and metal sheet mansard roof with inserted plastic lights. The slip, which survives beneath the inserted wooden floor, is of stone.

PLAN: apsidal aisled plan on a roughly west/east alignment, with gabled west end facing the River Tamar. The structure is 88.7 metres long and 31.4 metres wide.

DESCRIPTION: the former slip is floored over, the timber floor being supported on brick pillars; the original masonry survives beneath the floor, with some later material. The structure of the slip cover consists of compound timber stanchions to cantilevered principal rafters, braced to the stanchions and to a collar beneath the shallow pitched roof; the principals extend out over the outer aisles with two braces. The sides are clad with corrugated sheeting, overhung by the wide eaves of the roof. The west end is enclosed by the metal sheeting, slanting downwards, supported on a C20 metal frame. On the south elevation, towards the west end, is a C20 taking-in door with a metal-framed cover. On the wooden floor, drawn or painted markings survive, relating to the building's former use for shipbuilding. In the south-east corner of the building is a circa 1980s temporary structure containing offices; this is not of special interest. The interior of the building also contains a number of C20 and C21 fixtures and fittings, including lighting and heating equipment, which are not of special interest.

SUBSIDIARY FEATURES: at the west end of the building, on the northern side, a room has been created under the roof overhang by filling in with brick walling. Also against the north side, towards the centre, a corrugated metal shed has been erected. The brick walling and the shed are not of special interest.

History

The asset now known as the ‘Scrieve Board’ originated as one of four slips constructed during the post-1760s expansion of Devonport.

The slip’s cover was constructed circa 1814-21 after a design by Sir Robert Seppings, Surveyor to the Navy. Covers for slips were introduced into Naval dockyards to protect wooden ships during construction, and between 1814 and 1821 most of the dry docks and all the slips (at Devonport) had graceful timber framed housings added (Coad). Two survive at Devonport (this one and Slip No. 1 (qv)); the largest one, dating from 1836, is at Chatham (qv). When built such structures were the widest span roofs in Britain, and the widest in the world except for riding schools in Germany and Russia. As such they prefigured the iron slip covers of the 1840s and subsequent railway sheds.

The slip itself was altered and covered to form the ‘scrieve board’. This was the name given to the drawing floor on which finished outlines were ‘scrieved’ - sunk into the wood, or drawn or painted as here, at full size, for finished sections of steelwork – after the earlier drawings for a new design had been worked on in the mould loft. The scrieve board at Devonport was laid inside the existing covered slip. The scrieve board was conveniently located next door to the bending slab and adjoining Slip No. 4 (not listed). The only other surviving example of a scrieve board or mould loft in the Royal Dockyards is at Chatham, where in 1755 a mould loft was built over an existing masthouse of 1753 (qv).

Reasons for Listing

The Scrieve Board, a former slip, dating from the late C18, with slip cover of 1814-21, subsequently floored, and used in ship design, is listed at Grade II* for the following principal reasons:

* Historical interest: as one of four slips constructed during the post-1760s expansion of Devonport, given a slip cover in the early C19, and subsequently floored over and used as a scrieve board – or drawing board – in ship design, the structure is illustrative of a number of ship-building processes in the Royal Dockyard;

* Architectural and technological interest: the majestic timber slip cover of circa 1814-21, after a design by Sir Robert Seppings, demonstrates the technological innovation of what were at the time amongst the widest roof spans in Europe;

* Rarity: the slip cover is one of only a small number of its type and date to survive.

External Links

• Historic England Listing
• Wikidata Q17554664

External links are from the relevant listing authority and, where applicable, Wikidata. Wikidata IDs may be related buildings as well as this specific building. If you want to add or update a link, you will need to do so by editing the Wikidata entry.

Recommended Books

• 
  Bedfordshire, Huntingdonshire, and Peterborough (Pevsner Architectural Guides) (Pevsner Architectural Guides: Buildings of England)
• 
  Georgian Style and Design for Contemporary Living
• 
  Specifications for Building Conservation: Volume 1: External Structure: Practical Examples v. 2
• 
  This Old House: Restoring, Rehabilitating, and Renovating an Older House
• 
  Devon (Pevsner Architectural Guides: Buildings of England)
• 
  Sussex: East with Brighton and Hove (Buildings of England) (Pevsner Architectural Guides: Buildings of England)