Description

MOULTON HIGH STREET
TF 32 SW (east side)

9/105 Windmill
(formerly listed
7.2.67 with buildings at
20.10.87 entrance to road)

G.V. I

Tower mill. c.1822, by Robert King, 1895, 1928. Brown brick.
Corrugated iron shallow pointed roof of 1928, with finial, and
dentillated brick eaves. 8 storeys plus basement, a total of 80
feet in height to the curb. 18 feet, 9 inches in diameter at
ground level; 12 feet in diameter at curb. 3 round basement
openings, one each to the south-east, south-west and north-west.
To the north is a large drive wheel, part of steam engine gearing
inserted after 1895 after the sails had been damaged by gales.
West side with flanking flights of 8 stone steps on each side
that lead up to doorway with cambered head and panelled door. 7
glazing bar casements, one above the other, above; that on the
third floor inserted into blocked doorway that originally gave
access to reefing stage. North and south sides each with 8
glazing bar casements, one above the other above. East side with
a 2 storey granary attached masking the lower 3 storeys, the
ground floor of early C19 and rendered, the upper floors of 1895
and in red brick. Both storeys with pivotal glazing bar
casements. 5 glazing bar casements rise one above the other,
above the roof of the granary. All the windows with cambered
heads. Almost all the internal machinery survives intact. The
basement contains the engine drive gearing of c.1895 which
originally powered the subsidiary shaft rising up to the great
spur wheel. The first floor contains an electrically powered
Turner Inkoos Mill, a Kibbler and a Hunt's roller mill. The
second floor contains storage bins and the third, originally the
spent floor with bridge trees and now missing the governor. 2
pairs of French stones remain in place on the fourth floor, one
inscribed: 'WJ & T Child.Maker. Hull. 1853'. Pair of grey stones
lean against wall. Spur wheel with iron nuts and morticed
wooden cogs, iron hub and rib, with wooden radiating spokes.
Small iron nut engages the subsidiary drive shaft. Fifth and
sixth floors with bins intact. Upper two floors are empty.
Above, the wallower with chamfered and stopped wooden shaft with
upper iron section, and an exceptional wooden clasp arm bevel
wheel with wooden cogs. Endless chain sack hoist formerly driven
from a friction rim on the underside of the wheel. Hexagonal
wooden curb frame built into the brickwork, with iron track,
inward facing tooth ring and centring wheels running below. The
wind shaft no longer exists but the tail bearing housing remains.
This is the tallest windmill in the country (not including the
tallest complete windmill, including the cap, at Sutton in
Norfolk). Source: Dolman, p.23. Buildings at entrance to road
now demolished.

Listing NGR: TF3075524035

External Links

• Historic England Listing
• Moulton Windmill at Wikipedia
• Wikidata Q15256653

External links are from the relevant listing authority and, where applicable, Wikidata. Wikidata IDs may be related buildings as well as this specific building. If you want to add or update a link, you will need to do so by editing the Wikidata entry.

Recommended Books

• 
  County Durham (Pevsner Architectural Guides: Buildings of England) by Elizabeth Williamson Nikolaus Pevsner(1983-03-11)
• 
  Yorkshire West Riding: Sheffield and the South (Pevsner Architectural Guides: Buildings of England)
• 
  Hampshire: Winchester and the North (The Buildings of England) (Pevsner Architectural Guides: Buildings of England)
• 
  Listed Buildings: The Law and Practice of Historic Buildings, Ancient Monuments and Conservation Areas
• 
  Cornwall (Pevsner Architectural Guides) (Pevsner Architectural Guides: Buildings of England)
• 
  The Victorian House Manual (2nd Edition): How They Were Built, Improvements & Refurbishment, Solutions to All Common Defects - Includes Relevant ... ... Properties (Haynes Manual) (Haynes Manuals)