Latitude: 53.4932 / 53°29'35"N
Longitude: -2.4931 / 2°29'35"W
OS Eastings: 367379
OS Northings: 399725
OS Grid: SJ673997
Mapcode National: GBR CX11.1H
Mapcode Global: WH986.NGZC
Plus Code: 9C5VFGV4+7P
Entry Name: Leigh Mill
Listing Date: 25 April 1990
Grade: II*
Source: Historic England
Source ID: 1253119
English Heritage Legacy ID: 213535
ID on this website: 101253119
Location: Bedford, Wigan, Greater Manchester, WN7
County: Wigan
Electoral Ward/Division: Leigh South
Parish: Non Civil Parish
Built-Up Area: Atherton
Traditional County: Lancashire
Lieutenancy Area (Ceremonial County): Greater Manchester
Church of England Parish: Bedford St Thomas
Church of England Diocese: Manchester
Tagged with: Cotton mill Spinning mill
This list entry was subject to a Minor Amendment on 03/10/2012
SJ 69 NE
6/59
LEIGH
PARK LANE
Leigh Mill
II*
Large double cotton spinning mill. Built for the Horrocks Company; E Block, boiler house and chimney stack, 1913; W Block to the same design, 1923, both by Bradshaw, Gass & Hope, architects of Bolton. Red brick with buff brick banding and dressings, presumably cladding a reinforced steel frame. Roof material not visible. Both blocks, 6 storeys, 10 x 7 bays with corner water tower to SE and SW corner angle of E and W block respectively. One, the SE tower (to the 1913 block) rises to its full height with 2 stages above roof level, the lower stage with central roundel, the upper with deeply recessed round-headed niche, to all faces, surmounted by a slate cupola. The SW tower appears never to have had a cupola (1929 photograph shows it without one). Upper floor of main block treated as an attic storey with dentilled sill cornice. Windows all of 5 lights under flat heads. 5 elevations of both blocks with offices of 2 and 3 storeys, each block with engine house and rope race tower, the blank faces with round-headed niches. Low boiler house with much renewed S elevation; various entrances enlarged or blocked. Rear (N) elevations with stair and privy blocks, symmetrically placed. Tall stack with cap. Leigh Mill is one of the most monumental and complete mills surviving in Greater Manchester from the last generation of cotton mill building. It was designed as a double mill, although (as was often the case) the second block was not built until business proved the investment worthwhile. At peak production, the mill contained over 200,000 mule spindles and 4,800 ring spindles. Spinning machinery by Platt and Oldham (now removed); one steam engine survives intact and in working order (to the west, 1923, block) and is one of the largest produced by Yates and Thom. The pair were known as the 'Mayor' and 'Mayoress'. The boiler house contained 7 Lancashire boilers.
Listing NGR: SJ6737999725
External links are from the relevant listing authority and, where applicable, Wikidata. Wikidata IDs may be related buildings as well as this specific building. If you want to add or update a link, you will need to do so by editing the Wikidata entry.
Other nearby listed buildings