Description

SX 69 SW
12/202

SAMPFORD COURTENAY
STICKLEPATH
Finch Foundry and Foundry House

GV
II *
Originally woollen factory and grist mill then tool factory, saw mill, carpenter's and wheelwright's shop now a working museum.

The earliest buildings date possibly to the late C18 with considerable alterations during the C19, various additions and infills were made throughout the C19. Stone rubble walls with some cob. Gable ended slate roof. The house has rendered brick stack at left gable end.

Plan: Foundry House probably dates to the early C19 when the adjoining premises were taken over as a foundry and has a two-room central entry plan. In the early 1800s the premises consisted of two separate buildings - the larger one to the east a three-storey woollen factory, with a smaller building a short distance to its west functioning as a grist mill. In 1814 the eastern building was taken over by William Finch to become an edge tool works - used mainly as a forge rather than a foundry. The first and second storey floors were removed and the water wheel inserted at the right-hand side. In a deed of 1835 the building is referred to as a hammer mill and the second water wheel at the rear was probably added at this time to give an air blast to the forges. In circa mid C19 the adjoining westerly grist mill building was leased by Finch and converted to a grinding house also powered by a water wheel at its side. At subsequent stages in the C19 a stable was built in front of the right side of the forge building with an office on the first floor at its inner end and an open storage area below; to the right of this the area between the two original buildings was roofed to form a saw mill. Between the forge and the house a first floor room used as a workshop was built, allowing access below to the Quaker burial ground behind the premises.

At the rear of Foundry House a long outbuilding was built to store reed and straw which was used to wrap up the tools before despatch. The Saw Mill was subsequently demolished for road widening.

Exterior: Foundry House to left has symmetrical two-window front of original 16-pane hornless sashes with central C19 panelled double doors. Between the house and forge to the right is a tall archway with thoroughfare below (to burial ground) and granite steps to its right leading to balcony in front of first floor doorway. To their right is fallstone arch now infilled with door and window. Beyond is the forge which is lower and has doorway at its left-hand end. All three overshot water wheels survive at rear and side of forge and right side of grinding house.

Interior: retains the complete machinery from when the building was working, apart from the saw mill, consisting of tilt hammers, shear and drop hammers, four hearths and two furnaces, a polishing wheel, band saw and grindstone in the grinding house. The machinery is still in working order.

Listing NGR: SX6418794084

External Links

• Historic England Listing
• Wikidata Q17536877

External links are from the relevant listing authority and, where applicable, Wikidata. Wikidata IDs may be related buildings as well as this specific building. If you want to add or update a link, you will need to do so by editing the Wikidata entry.

Recommended Books

• 
  Old House Care and Repair
• 
  Development and Design of Heritage Sensitive Sites: Strategies for Listed Buildings and Conservation Areas
• 
  Planning (Listed Buildings and Conservation Areas) Act 1990
• 
  Gloucestershire 1: The Cotswolds: Cotswolds Pt. 1 (Pevsner Architectural Guides: Buildings of England)
• 
  Kent: West and the Weald: The Buildings of England (Pevsner Architectural Guides: Buildings of England)
• 
  Sussex: East with Brighton and Hove (Buildings of England) (Pevsner Architectural Guides: Buildings of England)